A Model-Based Approach for an Optimal Maintenance Strategy

##plugins.themes.bootstrap3.article.main##

##plugins.themes.bootstrap3.article.sidebar##

Published Jul 8, 2014
Bhaskar Saha Tomonori Honda Ion Matei Eric Saund Johan de Kleer Tolga Kurtoglu Zsolt Lattmann

Abstract

In this paper we introduce a novel model-based reliability analysis methodology to guide the best maintenance practices for the different components in complex engineered systems. We have developed a tool that allows the system designer to explore the consequences of different design choices, and to assess the effects of faults and wear on critical components as a result of usage or age. The tool uses pre-computed simulations of usage scenarios for which performance metrics can be computed as functions of system configurations and faulty/worn components. These simulations make use of damage maps, which estimate component degradation as a function of usage or age. This allows the designer to determine the components and their respective fault modes that are critical w.r.t. the performance requirements of the design. Given a design configuration, the tool is capable of providing a ranked list of critical fault modes and their individual contributions to the likelihood of failing the different performance requirements. From this initial analysis it is possible to determine the components that have little to no effect on the probability
of the system meeting its performance requirements. These components are likely candidates for reactive maintenance. Other component faults may affect the performance over the short or long run. Given a limit for allowable failure risk, it is possible to compute the Mean Time Between Failure (MTBF) for each of those fault modes. These time intervals, grouped by component or Line Replaceable Units (LRUs), are aggregated to develop a preventive maintenance schedule. The most critical faults may be candidates for Condition-Based Maintenance (CBM). For these cases, the specific fault Bhaskar Saha et. al. This is an open-access article distributed under the terms of the Creative Commons Attribution 3.0 United States License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. modes considered for CBM also guide sensor selection and placement.

How to Cite

Saha, B., Honda, T., Matei, I., Saund, E., Kleer, J. de, Kurtoglu, T., & Lattmann, Z. (2014). A Model-Based Approach for an Optimal Maintenance Strategy. PHM Society European Conference, 2(1). https://doi.org/10.36001/phme.2014.v2i1.1520
Abstract 314 | PDF Downloads 79

##plugins.themes.bootstrap3.article.details##

Keywords

condition based maintenance (CBM), reliability, Reliability Centred Maintenance, Maintainability, Modelica

References
Barlow, R., & Hunter, L. (1960). Optimum Preventive Maintenance Policies. Operations Research, 8(1), 90–100.
Dallosta, P. M., & Simcik, T. A. (2012, March-April). Designing for Supportability: Driving Reliability, Availability, and Maintainability In... Defense AT&L: Product Support Issue, 34-38.
de Kleer, J., Janssen, B., Bobrow, D., Kurtoglu, T., Saha, B., Moore, N., & Sutharshana, S. (2013). Fault augmented modelica models. In 24th International Workshop on Principles of Diagnosis.
DES JSC TLS POL REL. (2009). Applied Reliability and Maintainability Manual for Defence Systems. Ministry of Defence, Abbey Wood (South), Bristol, UK.
Ender, T., Browne, D., Yates,W., & O’Neal, M. (2012). Fact: An m&s framework for systems engineering. In The interservice/industry training, simulation & education conference (i/itsec) (Vol. 2012).
FitzGerald, A. (2001). Design for Maintainability (DFM). http://www.theriac.org/DeskReference/viewDocument.php?id=222#section6.
Honda, T., Saund, E., Matei, I., Janssen, W., Saha, B., Bobrow, D., de Kleer, J., & Kurtoglu, T. (2014). A simulation and modeling based reliability requirements assessment methodology. In 26th International Conference on Design Theory and Methodology (iDETC/DTM).
Jardine, A. K., Lin, D., & Banjevic, D. (2006). A Review on Machinery Diagnostics and Prognostics Implementing Condition-Based Maintenance. Mechanical Systems and Signal Processing, 20(7), 1483–1510.
Mourelatos, Z., Li, J., Pandey, V., Singh, A., Castanier, M., & Lamb, D. (2011). A simulation and optimization methodology for reliability of vehicle fleets (Tech. Rep.). DTIC Document.
Wiley, D., & Williams, D. G. (1980, May 20). Brake pad wear detection system. (US Patent 4,204,190)
Section
Technical Papers

Similar Articles

<< < 1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.