Combination of analytical and statistical models for dynamic systems fault diagnosis

##plugins.themes.bootstrap3.article.main##

##plugins.themes.bootstrap3.article.sidebar##

Anibal Bregon Diego Garcia-Alvarez Belarmino Pulido Maria Jesus Fuente

Abstract

Complex industrial and aerospatial systems require efficient monitoring and fault detection schemes to ease prognosis and health monitoring tasks. In this work we rely upon the model-based approach to perform robust fault detection and isolation using analytical and statistical models. We have combined Principal Component Analysis (PCA) together with Possible Conflicts (PCs), to improve the overall diagnosis process for complex system. Our proposal uses residuals computed using PCs as the input for the PCA tool. The PCA tool is able to accurately determine significant deviations in the residuals, that will be identified as faults. The integration of both techniques provides more robust results for fault detection, while avoiding false alarms in PCAs due to changes in operation modes. Moreover, it provides the PCA approach with the necessary mechanisms to perform fault isolation. This approach has been tested on a laboratory plant with real data, obtaining promising results.

How to Cite

Bregon, A., Garcia-Alvarez, D., Pulido, B., & Jesus Fuente, M. (2010). Combination of analytical and statistical models for dynamic systems fault diagnosis. Annual Conference of the PHM Society, 2(1). https://doi.org/10.36001/phmconf.2010.v2i1.1886
Abstract 126 | PDF Downloads 44

##plugins.themes.bootstrap3.article.details##

Keywords

fault diagnosis, principal component analysis, model decomposition

References
Armengol, J., Bregon, A., Escobet, T., Gelso, E., Krysander, M., Nyberg, M., et al. (2009). Minimal Structurally Overdetermined sets for residual generation: A comparison of alternative approaches. In Proceedings of the 7th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes, SAFEPROCESS09 (p. 14801485). Barcelona, Spain.

Blanke, M., Kinnaert, M., Lunze, J., & Staroswiecki,M. (2006). Diagnosis and Fault-Tolerant Control. Springer.Bregon, A., Pulido, B., Biswas, G., & Koutsoukos,X. (2009). Generating Possible Conflicts from Bond Graphs Using Temporal Causal Graphs. In Proceedings of the 23rd European Conference on Modelling and Simulation, ECMS09 (p. 675-682). Madrid, Spain.
Bro, R., Kjeldahl, K., & Kiers, H. (2008). Crossvalidation of component models: A critical look at current methods. Analytical and Bioanalytical Chemistry, 390, 1241-1251.

Chiang, L., Russell, E., & Braatz, R. (2000). Fault Detection and Diagnosis in Industrial Systems. Nueva York: Springer.

Dressler, O., & Struss, P. (1996). The Consistency-based approach to automated diagnosis of devices. InIndustrial Systems. Nueva York: Springer.

G. Brewka (Ed.), Principles of Knowledge Representation (p. 269-314). CSLI Publications, Standford.

Eastment, H., & Krzanowski, W. (1982). Cross validatory choice of the number of components from a principal component analysis. Technometrics, 24, 73-77.

Fuente, M., Garcia, G., & Sainz, G. (2008). Fault diagnosis in a plant using Fisher discriminant analysis. Proceding of the 16th Mediterranean Conference on Control and Automation Congress Centre, Ajaccio, France, 53-58.

Gertler, J. (1998). Fault Detection and Diagnosis in Engineering Systems. Marcel Dekker, Inc. Gertler, J., Li, W., Huang, Y., & McAvoy, T. (1999).

Isolation enhanced principal component analysis. American Institute of Chemical Engineers (AIChE) Journal, 45, 323-334.

Huang, Y., Gertler, J., & McAvoy, T. (2000). Sensor and actuator fault isolation by structured partial PCA with nonlinear extensions. Journal of Process Control, 10(5), 459-469.

Hwang, D., & Han, C. (1999). Real-time monitoring for a process with multiple operating modes. Control Engineering Practice, 7, 891-902.

Jackson, J. (1991). A user’s guide to principal components. Wiley.

Jackson, J., & Mudholkar, G. (1979). Control procedures for residuals associated with principal component analysis. Technometrics, 21, 341-349.

Kourti, T., & MacGregor, J. (1996). Multivariate SPC Methods for Process and Product Monitoring. Journal of Quality Technology, 28, 409-428.

Ku, W., Storer, R., & Georgakis, C. (1995, November). Disturbance detection and isolation by dynamic principal component analysis. Chemometrics and intelligent laboratory systems, 30, 179-196.
Lane, S., Martin, E., Morris, A., & Gower, P. (2003). Application of exponentially weighted principal component analysis for the monitoring of a polymer film manufacturing process. Transactions of the Institute of Measurement and Control, 25, 17-35.

Li, W., Yue, H., Valle-Cervantes, S., & Qin, S. (2000).Recursive PCA for adaptative process monitoring. Journal of Process Control, 10, 471-486.

Misra, M., Yue, H., Qin, S., & Ling, C. (2002). Multivariable process monitoring and fault diagnosis by multi-scale PCA. Computers & Chemical Engineering, 26, 1281-1293.

Pulido, B., Alonso, C., & Acebes, F. (2001). Lessons learned from diagnosing dynamic systems using possible conflicts and quantitative models. In Engineering of Intelligent Systems. XIV Conf. IEA/AIE-2001 (Vols. LNAI, Current Topics in AI, Springer, p. 135-144). Budapest, Hungary.

Pulido, B., & Alonso-González, C. (2004, Octubre).Possible Conflicts: a compilation technique for consistency-based diagnosis. IEEE Trans. on Systems, Man, and Cybernetics. Part B: Cybernetics, 34(5), 2192-2206.

Reiter, R. (1987). A Theory of Diagnosis from First Principles. Artificial Intelligence, 32, 57-95.

Tien, D., Lim, K., & Jun, L. (2004, November 2-6).Compartive study of PCA approaches in process monitoring and fault detection. The 30th annual conference of the IEEE industrial electronics society, 2594-2599.

Venkatasubramanian, V., Rengaswamy, R., Kavuri, S.,& Yin, K. (2003). A review of process fault detection and diagnosis. Part I, II and III: Quantitative model-based methods. Computers & Chemical Engineering, 27, 291-346.

Weighell, M., Martin, E., & Morris, A. (2001). The statistical monitoring of a complex manufacturing process. Journal of Applied Statistics, 28, 409425.

Wold, S. (1987). Principal Component Analysis. Chemometrics and intelligent laboratory systems, 2, 37-52.

Zumoffen, D., & Basualdo, M. (2007). From large chemical plant data to fault diagnosis integrated to decentralized fault tolerant control: pulp mill process application. Industrial & Engineering Chemistry Research, 47, 1201-1220.
Section
Technical Papers