Towards a model-based condition assessment of complex marine machinery systems using systems engineering
##plugins.themes.bootstrap3.article.main##
##plugins.themes.bootstrap3.article.sidebar##
Abstract
In the present paper, a systems engineering methodology is presented for the analysis and condition assessment of complex marine machinery systems. Two important characteristics of these systems are (i) that they comprise of a multitude of subcomponents which influence the overall system condition/performance and (ii) the continuously varying operating and environmental conditions. The methodology presented herein is capable to evaluate the system level effects of component degradation and faulty states under realistic system operation. By virtue of this, it is employed along with sensor signal data for the identification of degraded states and the allocation of the problem to specific system components. The modelling platform used in this work is the DNVGL COSSMOS (Complex Ship System Modelling & Simulation).
At the methodological level, an automated model-based sensitivity analysis is conducted with respect to a set of component degradation/failure modes. The latter is used along with a clustering algorithm for the precise allocation of the failure to specific components and system particulars. The selected case-study is the Diesel-electric marine propulsion system of a 2300 tonnes DWT (deadweight tonnage) anchor handling vessel embedded with its cooling network. Based on the results, the approach is capable to successfully identify faults at various subcomponents of the cooling network system including pumps, regulating valves, heat exchangers and piping. Due to the fact that the system is treated in an integrated manner, a fault can be identified in a component using sensor signals placed in other system locations.
How to Cite
##plugins.themes.bootstrap3.article.details##
condition monitoring, systems engineering, sensitivity analysis, Model-based diagnosis, Marine Propuslion and cooling systems, SOMs
Baraldi, P., Maio, F. D., Genini, D., & Zio, E. (2015). Comparison of Data-Driven Reconstruction Methods for Fault Detection. IEEE Transactions on Reliability, 64(3), 852-860.
Blanke, M. (2001). Enhanced maritime safety through diagnosis and fault tolerant control. Paper presented at the IFAC conference CAMS' 2001.
Campora, U., & Figari, M. (2003). Numerical simulation of ship propulsion transients and full-scale validation. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 217, 41-52.
Chen, J., & Patton, R. J. (1999). Robust Model-Based Fault Diagnosis for Dynamic Systems: Springer.
Coull, G. (2015). Condition monitoring in the marine sector. Naval Architect, 20-22.
Dimopoulos, G. G. (2009). Synthesis, Design and Operation Optimization of Marine Energy Systems. PhD Phd Thesis, National Technical University of Athens, Athens, Greece.
Dimopoulos, G. G., Georgopoulou, C. A., Stefanatos, I. C., Zymaris, A. S., & Kakalis, N. M. P. (2014). A general-purpose process modelling framework for marine energy systems. Energy Conversion and Management 86 (2014) 325–339.
Dimopoulos, G. G., & Kakalis, N. M. P. (2010). An integrated modelling framework for the design, operation and control of marine energy systems. Paper presented at the 26th CIMAC World Congress, Bergen, Norway.
Dimopoulos, G. G., Kougioufas, A. V., & Frangopoulos, C. A. (2008). Synthesis, design and operation optimization of a marine energy system. Energy, 33(2), 180-188.
DNVGL. (2015). Research Review 2015
Next generation winning concepts. In D. S. R. Innovation: (Ed.).
Ge, Z., Song, Z., & Gao, F. (2013). Review of Recent Research on Data-Based Process Monitoring. Industrial & Engineering Chemistry Research(52), 3543−3562.
Glaessgen, E. H., & Stargel, D. S. (2012). The digital twin paradigm for future NASA and US Air Force vehicles. Paper presented at the 53rd Structures, Structural Dynamics and Materials Conference.
Grimmelius, H. T., Meiler, P. P., Maas, H. L. M. M., Bonnier, B., Grevink, J. S., & Kuilenburg, R. F. v. (1999). Three State-of-the-Art Methods for Condition Monitoring. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 46(2). doi: 0278–0046/99$10.00
Hansen, J. F., Adnanes, A. K., & Fossen, T. I. (2001). Mathematical Modelling of Diesel-Electric Propulsion Systems for Marine Vessels. Mathematical and Computer Modelling of Dynamical Systems, 7(3), 323-355. doi: 10.1076/mcmd.7.3.323.3641
Isermann, R. (2011). Fault-Diagnosis Applications: Model-Based Condition Monitoring: Actuators, Drives, Machinery, Plants, Sensors, and Fault-tolerant Systems: Springer
Ito, K., & Akagi, S. (1986). An optimal planning method for a marine heat and power generation plant by considering its operational problem. Energy Research, 10 (1), 75-85. doi: 10.1002/er.4440100109
Jefferson, M., Zhou, P. L., & Hindmarch, G. (2003 ). Analysis by computer simulation of a combined gas turbine and steam turbine (COGAS) system for marine propulsion. Paper presented at the Proceeding of IMarEST - Part A - Journal of Marine Engineering and Technology.
Kakalis, N. M. P., & Dimopoulos, G. (2012). Managing the complexity of marine energy systems Position Paper: Det Norske Veritas, Research & Innovation.
Kohonen, T. (2001). Self-Organizing Maps: Springer Series in Information Sciences.
Kouremenos, D. A., & Hountalas, D. T. (1997). Diagnosis and condition monitoring of medium-speed marine diesel engines, . Tribotest Journal, 4(1), 63–91.
Kyrtatos, N. P., & Lambropoulos, V. (2000). Modular Simulation of Marine Propulsion Systems Using an Engineering Building Block Approach. Paper presented at the ISME 6th International Symposium on Marine Engineering, Tokyo, Japan.
Kyrtatos, N. P., Theodossopoulos, P., Theotokatos, G., & Xiros, N. (1999). Simulation of the Overall Ship Propulsion Plant for Performance Prediction and Control. Paper presented at the MarPower Conference, Newcastle-upon-Tyne, UK.
Ludvigsen, K. B., Jamt, L. K., Husteli, N., & Smogeli, Ø. (2016). Digital twins for design, testing and verification throughout a vessel’s life cycle. Paper presented at the COMPIT 2016 (to be presented), Lecce, Italy.
Manno, G., et, & Al. (2015). MODAM: Model based Data Driven Asset Management, DNV GL, ABB Marine and BW Gas - Project Plan.
Manno, G., Knutsen, K. E., & Vartdal, B. J. (2014). An Importance Measure approach to system level Condition Monitoring of Ship Machinery Systems. Paper presented at the CM 2014 and MFPT 2014, Manchester
Monnin, M., Voisin, A., Leger, J.-B., & Iung, B. (2011). Fleet-wide health management architecture. Paper presented at the Annual Conference of the Prognostics and Health Management Society, 2011, Montreal, Quebec, Canada
Moosavi, V. (2016). SOMPY, https://github.com/sevamoo/SOMPY, from https://github.com/sevamoo/SOMPY
Naumann, U. (2012). The Art of Differentiating Computer Programs: An Introduction to Algorithmic Differentiation. . SIAM series on Software, Environments and Tools.
Pedersen, T.-A., & Pedersen, E.-H. (2012). Bond graph modelling of marine power systems. Mathematical and Computer Modelling of Dynamical Systems: Methods, Tools and Applications in Engineering and Related Sciences 18(2), 153-173. doi: DOI:10.1080/13873954.2011.603735
PSE. (2016). gPROMS, from http://www.psenterprise.com/gproms.html
Rüde, E. (2006). Entwicklung eines Simulationsmodells für ein Kühlwassersystem zur Identifikation der Zustandsüberwachungsparameter. Diploma Thesis, Technische Universität Hamburg-Hamburg, Hamburg.
Schenk, A., Natale, S., Germond, A., Boss, P., & Lam, A. (2002). Tranformer state assessment: Self-orginizing maps as an intelligent on-line data processor. Paper presented at the CIGRE 2002 Paris.
SINTEF. (2002). OREDA: Offshore Reliability Data: OREDA Participants.
Tostevin, G. M., & Nealy, J. C. (2003). Computer synthesis for the design of marine power plants. Journal of marine design and operations, B (2003), 25-32.
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011). Reengineering aircraft structural life prediction using a digital twin. Int. J. Aerospace Eng.
Twiddle, J. A., & Jones, N. B. (2002). Fuzzy model-based condition monitoring and fault diagnosis of a diesel engine cooling system. Proc Instn Mech Engrs Part I: J Systems and Control Engineering, 216
Voisin, A., Medina-Oliva, G., Monnin, M., Leger, J.-B., & Iung, B. (2013). Fleet-wide Diagnostic and Prognostic Assessment. Paper presented at the Annual Conference of the Prognostic and Health Management Society 2013, New Orleans, USA.
Vrijdag, A., Stapersma, D., & Terwisga, T. v. (2009). Systematic modelling, verification, calibration and validation of a ship propulsion simulation model. Proceedings of IMarEST - Part A - Journal of Marine Engineering and Technology A15:2009 3-20.
Wang, X. Z. (1999). Data Mining and Knowledge Discovery for Process Monitoring and Control. London: Springer.
Watzenig, D., Sommer, M. S., & Steiner, G. (2013). Model-Based Condition and State Monitoring of Large Marine Diesel Engines. In S. Bari (Ed.), Diesel Engine - Combustion, Emissions and Condition Monitoring.
Yin, S., Ding, S. X., Xie, X., & Luo, H. (2014). A Review on Basic Data-Driven Approaches for Industrial Process Monitoring. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 61(11).
This work is licensed under a Creative Commons Attribution 3.0 Unported License.
The Prognostic and Health Management Society advocates open-access to scientific data and uses a Creative Commons license for publishing and distributing any papers. A Creative Commons license does not relinquish the author’s copyright; rather it allows them to share some of their rights with any member of the public under certain conditions whilst enjoying full legal protection. By submitting an article to the International Conference of the Prognostics and Health Management Society, the authors agree to be bound by the associated terms and conditions including the following:
As the author, you retain the copyright to your Work. By submitting your Work, you are granting anybody the right to copy, distribute and transmit your Work and to adapt your Work with proper attribution under the terms of the Creative Commons Attribution 3.0 United States license. You assign rights to the Prognostics and Health Management Society to publish and disseminate your Work through electronic and print media if it is accepted for publication. A license note citing the Creative Commons Attribution 3.0 United States License as shown below needs to be placed in the footnote on the first page of the article.
First Author et al. This is an open-access article distributed under the terms of the Creative Commons Attribution 3.0 United States License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.