Physics-Based Degradation Modelling for Filter Clogging



Published Jul 8, 2014
O. F. Eker F. Camci I. K. Jennions


Separation of solids from fluid is a vital process to achieve the desired level of purification in industry. Contaminant filtration is a common process in a variety of applications in industry. Clogging of filter phenomena is the primary failure mode leading to replacement or cleansing of filter. Reduced performance and efficiency or cascading failures are the unfortunate outcomes of a clogged filter. For instance, solid contaminants in fuel may lead to performance reduction in the engine and rapid wear in the fuel pump. This paper presents the development of an experimental rig to collect accelerated filter clogging data and a physics-based degradation model to represent the filter clogging. In the experimental rig, pressure drop across the filter, flow rate, and filter mesh images are acquired during the accelerated clogging experiments. The pressure drop across the filter due to deposition of suspended solids in the liquid is modelled and employed in the degradation modelling. Then, the physics based degradation model simulated using MatLab is compared with the real clogging data and the effectiveness of the degradation model is evaluated.

How to Cite

Eker, O. F., Camci, F., & Jennions, I. K. (2014). Physics-Based Degradation Modelling for Filter Clogging. PHM Society European Conference, 2(1).
Abstract 1524 | PDF Downloads 721



model-based prognostics, Filter Clogging, equipment degradation modeling

Abboud, N. M. and Corapcioglu, M. Y. (1993), "Modeling of Compressible Cake Filtration", Journal of colloid and interface science, vol. 160, no. 2, pp. 304-316.
Carman, P. G. (1997), "Fluid flow through granular beds", Chemical Engineering Research and Design, vol. 75, no. 1 SUPPL., pp. S32-S46.
Cheremisinoff, N. P. (1998), Liquid Filtration , Second Edition ed, Elsevier Inc.
Eker, O. F., Camci, F. and Jennions, I. K. (2013), "Filter Clogging Data Collection for Prognostics", Proceedings of the Annual Conference of the Prognostics and Health Management Society, 14-17 Oct 2013, New Orleans LA, USA, pp. 624-632.
Ergun, S. (1952), "Fluid Flow through Packed Columns", Chemical Engineering and Processing, vol. 48, pp. 89-94.
Hamachi, M. and Mietton-Peuchot, M. (2001), "Cake thickness measurement with an optical laser sensor", Chemical Engineering Research and Design, vol. 79, no. 2, pp. 151-155.
Ni, L. A., Yu, A. B., Lu, G. Q. and Howes, T. (2006), "Simulation of the cake formation and growth in cake filtration", Minerals Engineering, vol. 19, no. 10, pp. 1084-1097.
Sparks, T. (2011), Solid-Liquid Filtration: A User's Guide to Minimizing Cost & Environmental Impact, Maximizing Quality & Productivity, First Edition ed, Elsevier Science & Technology Books.
Sutherland, K. (2010), "Mechanical engineering: The role of filtration in the machinery manufacturing industry", Filtration and Separation, vol. 47, no. 3, pp. 24-27.
Tien, C. and Ramarao, B. V. (2013), "Can filter cake porosity be estimated based on the Kozeny-Carman equation?", Powder Technology, vol. 237, pp. 233-240.
Tien, C. and Bai, R. (2003), "An assessment of the conventional cake filtration theory", Chemical Engineering Science, vol. 58, no. 7, pp. 1323-1336.
Wakeman, R. (2007), "Filter media: Testing for liquid filtration", Filtration and Separation, vol. 44, no. 3, pp. 32-34.
Wilfong, D., Dallas, A., Yang, C., Johnson, P., Viswanathan, K., Madsen, M., Tucker, B. and Hacker, J. (2010), "Emerging challenges of fuel filtration", Filtration, vol. 10, no. 2, pp. 107-117.
Technical Papers

Similar Articles

<< < 4 5 6 7 8 9 10 11 > >> 

You may also start an advanced similarity search for this article.