A Deep Learning-Based Method for Cutting Parameter Optimization for Band Saw Machine
In the rough machining stage, band saw machines are widely used to cut various raw materials into the required dimensions. The replacement of blade due to the blade degradation accounts for a large part of the total cost of band saw machine users. Therefore, mitigating the blade degradation by dynamically optimizing the cutting parameters can produce great economic benefits and is also a good exploration for smart manufacturing. To achieve this goal, the Convolutional Neural Network (CNN) model is proposed to map the complicated relationship between the cutting parameters and blade degradation. Then a simulation technique is used to search the optimal cutting parameters based on the blade degradation estimation from the model output, which would help alleviate the blade degradation. The proposed optimization method is validated on the data collected during the real manufacturing process of band saw machines. The comparative results demonstrate that the obtained optimal cutting parameters can effectively extend the service life of the blade for a band saw machine.
How to Cite
convolutional neural network, band saw machine, cutting parameter optimization
This work is licensed under a Creative Commons Attribution 3.0 Unported License.
The Prognostic and Health Management Society advocates open-access to scientific data and uses a Creative Commons license for publishing and distributing any papers. A Creative Commons license does not relinquish the author’s copyright; rather it allows them to share some of their rights with any member of the public under certain conditions whilst enjoying full legal protection. By submitting an article to the International Conference of the Prognostics and Health Management Society, the authors agree to be bound by the associated terms and conditions including the following:
As the author, you retain the copyright to your Work. By submitting your Work, you are granting anybody the right to copy, distribute and transmit your Work and to adapt your Work with proper attribution under the terms of the Creative Commons Attribution 3.0 United States license. You assign rights to the Prognostics and Health Management Society to publish and disseminate your Work through electronic and print media if it is accepted for publication. A license note citing the Creative Commons Attribution 3.0 United States License as shown below needs to be placed in the footnote on the first page of the article.
First Author et al. This is an open-access article distributed under the terms of the Creative Commons Attribution 3.0 United States License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.