Detection of CH-53 swashplate bearing deformation - from a 3D dynamic model to diagnostics
##plugins.themes.bootstrap3.article.main##
##plugins.themes.bootstrap3.article.sidebar##
Abstract
The purpose of this paper is to present the research approach for the development of an algorithm for detection of a failure of the CH-53 swashplate bearing external spacer. The failure causes a lack of support of the swashplate bearing, thus creating a deformation of the outer ring. This study integrates the results of a new 3D dynamic model, developed for assessment of the defect pattern, and results from experiments. The research approach is planned in hierarchical phases. The experimental phases include a small scale specimen, full scale test rig, helicopter blades test facility and finally a CH-53 helicopter. The unique approach gradually simulates the real work environment of the swashplate bearing. The first two experimental phases and their results are presented. The first experimental phase is conducted on a small scale specimen and the second phase on a full scale test rig. Model results indicate that the lack of support has a defect pattern in both the radial and axial directions. These results are validated with the small scale specimen. In the future phases, the algorithm will be validated with data from the helicopter blades test facility and CH-53 helicopter.
How to Cite
##plugins.themes.bootstrap3.article.details##
helicopters, prognostics, experimental test stand, bearing defect diagnosis, swashplate
Tkachuk, P. & Strackeljan, J. (2010). A 3D-ball bearing model for simulation of axial load variations. The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (pp. 1–10).
Keller, J. & Grabill, P. (2005). Inserted fault vibration monitoring tests for a CH-47D Aft swashplate bearing. The American helicopter society 61st Annial Forum.
Bayoumi, A., Goodman, N., Shah, R., Roebuck, T., Jarvie, A. & Eisner, L. (2008). Conditioned-Based Maintenance at USC - Part III: Aircraft Components Mapping and Testing for CBM. The American Helicopter Society Specialists' Meeting on Condition Based Maintenance. Huntsville.
Blechertas, V., Bayoumi, A., Goodman, N., Shah, R. & Shin, Y. J., (2009). CBM Fundamental Research at the University of South Carolina: A Systematic Approach to U.S. Army Rotorcraft CBM and the Resulting Tangible Benefits. The American Helicopter Society Technical Specialists’ Meeting on Condition Based Maintenance. Huntsville.
Chin, H. H., Mayhew, E. & Green, D. L. (2005). Assessing Bearing Health for Helicopter Power Train Systems. American Helicopter Society 61st Annual Forum. Grapevine.
Blunt, D. M. & Keller, J. A. (2006). Detection of a fatigue crack in a UH-60A planet gear carrier using vibration analysis. Mechanical Systems and Signal Processing, 20(8), 2095–2111.
Dempsey, P., Branning, J. & Arsenal, R. (2010). Comparison of Test Stand and Helicopter Oil Cooler Bearing Condition Indicators. AHS 66th Annual Forum
and Technology.
Budynas, R. & Nisbett, K. (2006). Shigley's Mechanical Engineering Design (Mcgraw-Hill Series in Mechanical Engineering). McGraw-Hill Science/Engineering/Math.
The Prognostic and Health Management Society advocates open-access to scientific data and uses a Creative Commons license for publishing and distributing any papers. A Creative Commons license does not relinquish the author’s copyright; rather it allows them to share some of their rights with any member of the public under certain conditions whilst enjoying full legal protection. By submitting an article to the International Conference of the Prognostics and Health Management Society, the authors agree to be bound by the associated terms and conditions including the following:
As the author, you retain the copyright to your Work. By submitting your Work, you are granting anybody the right to copy, distribute and transmit your Work and to adapt your Work with proper attribution under the terms of the Creative Commons Attribution 3.0 United States license. You assign rights to the Prognostics and Health Management Society to publish and disseminate your Work through electronic and print media if it is accepted for publication. A license note citing the Creative Commons Attribution 3.0 United States License as shown below needs to be placed in the footnote on the first page of the article.
First Author et al. This is an open-access article distributed under the terms of the Creative Commons Attribution 3.0 United States License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.