Variable Selection and Indices Proposal for the Determination of an Aeronautic Valve Degradation

##plugins.themes.bootstrap3.article.main##

##plugins.themes.bootstrap3.article.sidebar##

Published Oct 18, 2015
Ananda S. Ribeiro Takashi Yoneyama Rodrigo F. Souto Wallace Turcio

Abstract

This work presents a method to select parameters and use them in an index to identify the degradation level of an aeronautic valve of the type PRSOV (Pressure Regulator and Shutoff Valve), a valve of the bleed air system of aircrafts. This index function is to be used as an input to the valve controller reconfiguration as the valve presents degradation while ages. The monitoring of degradation rates can provide information to modify the controller parameters in order to increase the valve useful life, to allow maintenance services planning or even to prevent the system performance being meaningfully impacted by the valve aging. The sorts of degradation considered were: friction increase, charging orifice obstruction and venting orifice obstruction. The study was made based on the valve mathematical model, in which was possible to vary those degradations levels and verify how each one influences the model response. The hysteresis graphic morphology was analyzed and also the sensibility and robustness after disturbances in the inlet air pressure with the system in closed loop, where the objective was to identify a monitoring that could be realized with the aircraft in air. The results allowed the identification of the most recommended parameters to monitor and the evaluation of the valve degradation through them.

How to Cite

S. Ribeiro , A. ., Yoneyama, T. ., F. Souto, R. ., & Turcio, W. . (2015). Variable Selection and Indices Proposal for the Determination of an Aeronautic Valve Degradation. Annual Conference of the PHM Society, 7(1). https://doi.org/10.36001/phmconf.2015.v7i1.2645
Abstract 313 | PDF Downloads 171

##plugins.themes.bootstrap3.article.details##

Keywords

Pneumatic Valves, PHM, aircraft, degradation

References
Black, S., Keller, K., Swearingen, K., Vandernoot, M., Hood, M., & Urnes, J. (2004). Reconfigurable control and fault identification system. In 2004 IEEE Aerospace Conference Proceedings (IEEE Cat. No.04TH8720) (Vol. 5). doi:10.1109/AERO.2004.1368154

Chapra, S. C., & Canale, R. P. (2008). Métodos Numéricos para Engenharia (Quinta Edi.). São Paulo - SP: McGraw-Hill.

Daigle, M. J., & Goebel, K. (2011). A Model-Based Prognostics Approach Applied to Pneumatic Valves. International Journal of Prognostics and Health Management, 2, 1–16.

Gomes, J. P. P., Ferreira, B. C., Cabral, D., Galvão, R. K. H., & Yoneyama, T. (2010). Health Monitoring of a Pneumatic Valve Using a PIT Based Technique. Annual Conference of the Prognostics and Health Management Society, 1–6.

Moir, I., & Seabridge, A. (2008). Aircraft Systems: Mechanical, Electrical and Avionics Subsystems Integration (Third., Vol. 40). Wiley. doi:10.1002/1521- 3773(20010316)40:6<9823::AID- ANIE9823>3.3.CO;2-C

Moreira, R. de P., & Nascimento Júnior, C. L. (2012). Prognostics of aircraft bleed valves using a SVM classification algorithm. In IEEE Aerospace Conference Proceedings (Vol. 4400, pp. 1–9). doi:10.1109/AERO.2012.6187377

Ogata, K. (2000). Engenharia de Controle Moderno (Terceira e.). LTC - Livros Técnicos e Científicos Editora S.A.

Pecht, M. G. (2008). Prognostics and Health Management of Electronics. John Wiley & Sons, Inc.

Turcio, W. H. L. (2014). Projeto de um controlador quasi- LPV para um sistema pneumático aeronáutico. Instituto Tecnológico da Aeronáutica.

Vachtsevanos, G., Lewis, F. L., Roemer, M., Hess, A., & Wu, B. (2006). Intelligent Fault Diagnosis and Prognosis for Engineering Systems. John Wiley & Sons, Inc.
Section
Technical Research Papers

Most read articles by the same author(s)

1 2 > >>